JVC DR-M7S E Set the following recording options as required, F Access the confirmation screen

Filename [DR-M7EK_08Recording.fm]
DR-M7EK_01.book Page 57 Friday, April 2, 2004 11:21 AM	Masterpage:Right-No-Heading

57

E Set the following recording options as required.

APress w e to select the desired option.

BPress rt to select the desired setting, then press

ENTER.

“REC MODE” ( pg. 54, “Recording Speed”) ( pg. 55, “Free Rate Function”), “VPS/PDC” ( pg. 59, “PDC Recording”)*, “DAILY/WEEKLY” (in the right column, “Daily/Weekly Rec Function” ), “NAME” ( pg. 70, “Modify Programme Name”), and “STOP” (To advance/ go back the stop time by 30 minutes, press and hold rt).

*VPS (Video Programme System) recording is not currently available in the U.K. and not possible with this unit.

F Access the confirmation screen.

Press ENTER.

G Complete timer programming.

Press ENTER.

●To programme another timer, repeat steps B – G.

●If “PROGRAM OVERLAPPED” appears on the TV screen, see “When programmes overlap each other” ( pg. 64).

H Engage the unit’s timer mode.

Press # (TIMER). The unit turns off automatically and “#” appears on the front display panel.

●To disengage the timer mode, press # (TIMER) again.

NOTES:

●There may be cases that VIDEO Plus+ programming timer recording function prolongs the stop time of the programming.

●The beginning of a programme may not be recorded. Also, if the 1st programme’s recording stop time and the 2nd programme’s recording start time is the same, the ending of the 1st programme may not be recorded.

●VIDEO Plus+ Timer Programming is not possible on the discs used exclusively for On-Disc Timer Programming.

●If the copy limited programme is received during timer-recording, the unit enters Record Pause mode. Recording starts again if it is switched to a recordable broadcast during the time you programmed.

Satellite Receiver Users

To timer-record a satellite broadcast using the VIDEO Plus+ system:

APerform “Satellite Receiver Control Setting” on page 28. B Perform “VIDEO Plus+® Timer Programming”. In step E,

you cannot set “VPS/PDC” to “ON”. C Leave the satellite receiver’s power on.

Daily/Weekly Rec Function

You can record programmes with one of the following weekly/ daily timer settings.

WEEKLY	Select to record a weekly programme.
MON–FRI	Select to record a daily programme from
	Monday through Friday.
MON–SAT	Select to record a daily programme from
	Monday through Saturday.
SUN–SAT	Select to record a daily programme from
	Sunday through Saturday.

Page 57

April 2, 2004 11:21 am