BASIC OPERATION
3.CHANGING CHANNELS
・You can select channels using Channel Select
•Using Channel Select (0-9, • (DOT), ENT)
When selecting the channel using Channel Select, complete input of the channel number by holding down the button for the last digit for a moment.
•To select a 1- or 2-digit channel number (e.g., Channel 5):
Complete the following procedure within 4 seconds.
1.Press the 0 button. 2.Press the 5 button. 3.Press the ENT button.
•To select a 3-digit channel number (e.g. Channel 115):
Complete the following procedure within 4 seconds.
1.Press the 1 button. 2.Press the 1 button. 3.Press the 5 button. 4.Press the
•To select a digit channel number (e.g. Channel 5.1):
Complete the following procedure within 4 seconds.
1.Press the 5 button. 2.Press the • button. 3.Press the 1 button. 4.Press the
ENT
ENT
button.
button.
Last
• Using LAST
・Press 
to switch the currently tuned channel to the previously tuned channel.
・Press 
again to switch back to the currently tuned channel.
4.INPUT SELECTION
1.Press TV,DVD,PC,YPbPr,Video,HDMI on Remote Control directly.
2. a:Press Input on the remote control to display the Input list.
b:Press ▲/▼ to select the desired source. c:Press ENTER to switch the input source.
Input
22
