10
10
MODE D’EMPLOI (SUITE)
JET DE VAPEUR
Pour obtenir un jet de vapeur puissant afin de
repasser plus rapidement et de lisser les plis
difficiles, appuyez fermement sur le bouton jet
de vapeur (figure 9). Pour obtenir de meilleurs
résultats, le voyant rouge de marche/chauffe
doit être allumé. N’appuyez pas plus de trois
fois de suite sur le bouton jet de vapeur. Attendez au moins 5 secondes
pour permettre au fer de chauffer à nouveau et de diffuser davantage
de vapeur. Pour un débit de vapeur maximal, veillez à ce que le
réservoir d’eau soit toujours au moins à moitié plein.
VAPORISATION
Pour vaporiser de l’eau sur les tissus secs et
difficiles tels que le lin, le coton ou la laine,
ou pour venir à bout des plis récalcitrants,
dirigez l’orifice de vaporisation et appuyez
sur le bouton (figure 10). La fonction de
vaporisation est également utile pour
humidifier les faux-plis accidentellement formés en repassant le tissu. La
fonction de vaporisation peut être utilisée avec tous les réglages et
n’affecte en rien la température de repassage.
REMARQUE : En début d'utilisation lors de chaque séance de
repassage, il peut être nécessaire d'appuyer plusieurs fois sur le bouton
pour amorcer la vaporisation.
UTILISATION DE LA FONCTION DÉFROISSAGEVERTICAL
La fonction défroissage vertical vous permet d’éliminer les plis des
rideaux sans les décrocher ou de défroisser des vêtements suspendus
sur un cintre.
1. Débranchez le fer.
2. Placez le sélecteur de température à la position
d’arrêt.
3. Remplissez le réservoir d’eau; consultez la
section REMPLISSAGE DU RÉSERVOIR D’EAU.
4. Posez le fer sur son talon en position verticale
sur une surface résistante à la chaleur.
Branchez la fiche sur une prise de
120 V ~ 60 Hz.
FIGURE 9
FIGURE 10
FIGURE 11
OPERATING INSTRUCTIONS (Cont.)
BURST OF STEAM
For a penetrating burst of steam to iron faster
and to smooth difficult wrinkles, firmly press
the Burst of Steam Button (see FIGURE 9). The
red Power On/Heating Light must be on for
best results. Do not press the Burst of Steam
Button more than three times successively.
Pause for at least 5 seconds to let the iron reheat for additional steam.
For maximum steaming, keep the Water Tank at least half full.
SPRAY
For a mist of water to moisten the dry and
difficult fabrics such as linen, cotton or
wool, or to handle stubborn wrinkles, aim
the Spray Nozzle and press the Spray
Button (see FIGURE 10). The spray function
is also handy to moisten creases accidental-
ly ironed into the fabric. The spray function can be used on any setting
and does not affect the ironing temperature.
NOTE: You may have to pump the Spray Button several times the first
time you use the iron each session to start the spraying action.
USING THE VERTICAL STEAM FUNCTION
The vertical steam feature allows you to eliminate wrinkles from drapes
without having to take them off the rod or to freshen the appearance of
clothing on the hanger.
1. Unplug the iron from the outlet.
2. Position the Temperature Control to the
OFF position.
3. Fill the water tank with water, see FILLING
THE WATER TANK.
4. Stand the iron on its heel in an upright posi-
tion on a heat-resistant surface. Plug into
120 V ~ 60 Hz outlet.
FIGURE 9
FIGURE 10
FIGURE 11