TitanTM Series
Titan™ Sub A12 Rear Panel Features
1. | HEAT SINK - | Cooling fins for amplifier. Do not obstruct. |
2. | VOLUME CONTROL - Adjusts the volume. | |
3. | INPUT L - | Balanced line level input via a XLR/ ¼” combo connector. |
4. | INPUT R - | Balanced line level input via a XLR/ ¼” combo connector. |
5. | OUTPUT R - | Balanced male XLR connector provides output HIGHPASS signal. |
6. | OUTPUT L - | Balanced male XLR connector provides output HIGHPASS signal. |
7. | POWER SOCKET - This is the connection for the IEC AC power connector. | |
8. | LIMIT LED - | LED indicator illuminates when the signal limiting function is activated. |
| POWER LED - | LED indicator illuminates when the unit is powered up |
9.POWER SWITCH - Turns the power on and off to the subwoofer amplifier module.
10.PHASE SWITCH - Selects the polarity of the signal being sent to the subwoofer. 0° selects the signal polarity as it appears at the input.
The 180° selection inverts the polarity of the signal. Adjustable 80Hz/100Hz/120Hz/150Hz/180Hz/200Hz.
1HHDW Sink
2VOLUME CONTROL
120Hz | 150Hz |
|
100Hz | 180Hz |
|
80Hz | 200Hz | 0 |
180
M A X | LOW |
| PASS FILTER |
CROSSOVER FREQUENCY
CONTROL 11
PHASE SWITCH 10
|
|
|
|
|
| POWER SWITCH | 9 |
|
|
| L |
|
| LIMIT LED AND | 8 |
|
|
|
|
|
| ||
|
|
| (BAL/UNBA L | (BALANCE D |
| POWER LED | |
|
|
| R |
|
| POWER SOCKET | 7 |
|
|
|
|
|
| ||
|
|
| INP UT | OUTP UT | AC220 240V 50Hz 250W |
| |
|
|
| FUSE T3.15AL250V |
| |||
3 |
|
|
|
|
| OUTPUT L | 6 |
|
|
|
|
| |||
INPUT | L |
|
| ||||
|
| OUTPUT R | 5 | ||||
4 | INPUT | R |
|
| |||
|
|
|
|
16