Removing the meat drawer
To remove the meat drawer:
1.Slide meat drawer out to the stop.
2.Lift front of meat drawer and slide meat drawer out the rest of the way.
3.Replace in reverse order.
To adjust the cover position:
1.Tilt front of cover up.
2.Lift back of cover.
3.Pull cover straight out.
To replace the cover:
1.Guide the cover’s rear hooks into the slots in the shelf supports on cabinet wall.
2.Tilt cover up at front until the hooks drop into slots.
3.Lower front of cover to a level position.
and cover
Pull out to the stop, lift the front, and pull again.
Removing the crispers and
To remove the crispers:
1.Slide crisper straight out to the stop.
2.Lift the front and slide out the rest of the way.
3.Replace in reverse order.
To remove the cover:
1.Push up the glass insert from the bottom, then slide out with both hands.
2.Lift front of cover frame.
3.Lift cover frame up and out.
To replace the cover:
1.Fit back of cover frame into notch supports on back wall of refrigerator, then lower the front into place.
2.Make sure the front cover metal support is in the notches in the sides of the liner.
NOTE: If the support is not positioned properly, the doors may not close all the way.
3.Slide back of glass insert into place, then lower front.
crisper cover
Remove the glass insert. Lift the cover front, then the back.
NOTE: Glass insert is heavy. Handle it carefully.
Pull out to the stop, lift the front, and pull again.
Adjusting the crisper humidity control
You can control the amount of humidity in the moisture- sealed crispers. Adjust the control to any setting between LOW and HIGH.
l LOW (open) lets moist air out of the crisper for best storage of fruits and vegetables with skins.
l HIGH (closed) keeps moist air in the crisper for best storage of fresh, leafy vegetables.
Humidity Control
10