Whirlpool 2184589 warranty TlI

To remove the shelf:

1.Remove all items from the shelf.

2.Hold back of shelf with one hand.

3.Lift front of shelf to 45” angle.

4.Lower shelf slightly to release shelf from upper channel of track. Then pull shelf straight out.

NOTE: Shelf is heavy. Make sure you use both hands when removing shelf.

ml

Uppyr channel

Hold with both hands and lift front to 45” angle.

To remove shelf track:

1.Lift both sides of track slightly.

2.Pull track straight out.

To replace shelf track:

1.Guide track hooks into the shelf support slots on the back wall of the cabinet.

NOTE: Make sure both track hooks are in slots and that the slots are parallel to each other.

2.Push track backward and down.

3.Check that track is completely seated in the shelf supports.

To reinstall shelf:

1.Hold shelf at front and back.

2.Tilt front of shelf up to a 45” angle to track.

3.Insert both rear shelf slides into upper channel of track.

4.Lower front of shelf to a level position.

NOTE: Make sure both rear shelf slides are securely in the track before letting go of shelf.

Hold both sides and lift up and out.

		\47	0 Shelf
			’ support
Make	sure		tlI
both	sets
of hooks			7I” ml
are in
support
slots.		KY

Upper channel

Insert rear shelf slides into upper channel of track.

9