Now start...

With washer in laundry area,

Numbers correspond to steps.

Read, then remove label that covers drain connector. Pull to completely remove the shipping strap with 2 cotter pins from the inside of the washer.

o remove the other

end of shipping strap from the back of the washer. The shipping strap plug must be completely removed from the washer for the self-leveling legs to be released.

Save the shipping strap for use in Step 16.

Use new hoses and washers that came with your Whirlpool washer.

washer

Insert a flat washer into each end of the inlet hoses. Check that washers are firmly seated in couplings.

I Attach hose to bottom inlet valve opening first; then second hose to top inlet. Tighten couplings by hand. Then use pliers to make an additional two-thirds turn.

IMPORTANT:THISPROCEDUREMUSTBE FOLLOWEDTO ASSUREPROPER INSTALLATION.

4 To prevent the drain hose from n coming off or leaking, it must be

installed per the following instructions:

1, Wet the inside end of the drain hose with tap water. DO NOT USEANY OTHERLUBRICANT.

2.Squeeze ears of clamp with pliers to open and place clamp over the end of the drain hose.

3.While holding clamp open, work end of drain hose onto drain connector until drain hose iswithin l/4 inch (0.64 centimeters) of ribbed stop.

4.Position clamp over the drain hose area marked “clamp.” Release clamp. Clamp should be l/4 inch (0.64 centimeters) from end of drain hose.

5 Open

n clamo and slide over ‘hook” end of drain hose to secure the rigid and corrugated sections together.

Floor Damage

Slide washer onto cardboard or hardboard before moving across floor.

Failure to do so may cause damage to floor covering.

6 Move washer close to final

n position. Put “hook” end of drain hose into laundry tub or standpipe. Check for proper length of drain hose.

nDO NOT FORCE EXCESSLENGTHOF DRAIN HOSEDOWN THESTANDPIPE. THIS COULD CAUSE SIPHONING.

II ’ II

Before attaching water inlet

8n hose, run water through both

faucets into a bucket. This will get rid of particles in the water lines that might clog hoses. Mark which isthe hot water faucet.

coupling washer

9 Attach bottom hose (inlet marked n ‘H”) to hot water faucet. Attach

top hose (inlet marked ‘C”) to cold water faucet. Tighten couplings to faucet by hand; then use pliers to make final two- thirds turn,

Panel B

Page 2 Page 4
Page 3
Image 3
Whirlpool 220/240-volt installation instructions Now start, With washer in laundry area Numbers correspond to steps
Page 2 Page 4

220/240-volt specifications

Whirlpool is a renowned brand in the home appliance industry, offering a diverse range of products designed to enhance convenience and efficiency in everyday life. Among their extensive lineup, Whirlpool 220/240-volt appliances stand out, catering to regions with higher voltage requirements. These high-voltage appliances are engineered to deliver optimal performance, ensuring that users can carry out household tasks with ease.

One of the main features of Whirlpool 220/240-volt appliances is their robust power capacity. Operating at this voltage allows for faster heating and more efficient operation, which is particularly noticeable in cooking and laundry appliances. This efficiency not only saves time but also helps reduce energy consumption, making them an environmentally friendly choice for the modern household.

Whirlpool leverages advanced technologies in their 220/240-volt appliances to enhance usability and functionality. For instance, many models come equipped with smart sensors that adjust temperature and humidity levels automatically, allowing for precise cooking and drying. This intelligent design ensures that users get perfect results every time, whether they are baking, frying, or washing clothes.

Another significant characteristic of Whirlpool 220/240-volt appliances is their innovative design. They are crafted with user-friendly interfaces, complete with digital displays and intuitive controls that simplify operation. Whether it’s choosing a washing cycle, setting the oven timer, or adjusting the temperature of a refrigerator, users can navigate their appliances effortlessly.

Durability is also a hallmark of Whirlpool products. The materials used in these appliances are selected for their resilience, ensuring they can withstand the rigors of daily use. Additionally, many models feature self-cleaning options or easily accessible maintenance points, extending their lifespan and saving users time on upkeep.

Whirlpool prioritizes energy efficiency across its range of 220/240-volt appliances. Models are designed to minimize energy usage without compromising performance, which is an important factor for eco-conscious consumers. Many units carry Energy Star certification, indicating they meet stringent energy efficiency guidelines.

In summary, Whirlpool's 220/240-volt appliances are designed for power, efficiency, and durability. With advanced technologies, user-friendly features, and a commitment to energy conservation, they provide an exceptional experience for households. Whether cooking, cleaning, or cooling, these appliances are built to meet the demands of modern living while ensuring user satisfaction.
Top Page Image Contents