Recessed area
instructions...
This washer may be installed in a recessed area or closet.
The installation spacing is in inches and is minimum allowable. Additional spacing should be considered for ease of installation and servicing.
If closet door is installed, the minimum air openings in top and bottom are required Louvered doors with air openings in top and bottom are acceptable.
Companion appliance spacing should be considered.
If you need
assistance...
Call your dealer or local authorized service company.
, . ,,,, ,,, ,,
wnen you call, you ~111neea tne wasner
model number and serial number. Both numbers are on the serial/rating plate located under the washer lid and on the top of the washer.
00
(43.kI’cm),‘F ii
rl
(0 Ocm) | (0 Ocm) |
Additional clearances for wall, door and floor moldings may be required.
Front view (door not shown)
Closet door
3”
(7.6 cm)
48 sq. in.
(310 sq. cm)
24 sq. in.
(155 sq. cm)
3”
(7.6 cm)
1” min.
(2.5 cm min.)
Side view | Front view |
|
Minimum installation spacing
Part No. 3358968 | Prepared by Whirlpool Corporation, | Benton Harbor, Michigan 49022 | Printed in U S.A. |
0 1992 Whirlpool Corporation |
