Understanding what happens in each cycle

When the Cycle Control Knob is set to a number and pulled out, the washer fills (to the selected load size) before agitation and timing start. The washer begins agitating immediately after filling; agitation occurs with the washer lid up or down.

After agitation starts, the Cycle Control Knob turns clockwise until it points to an OFF area and the cycle ends.

WASH

M4 Fill

Wash selected time

-w-Drain* I.4 No agitation

*The Permanent Press &cIe partially drains, fills, agitates briefly, and drains.

w Spin

NOTES:

l The washer pauses briefly throughout each cycle. These pauses are normal for washer operation.

l A Gentle Wash system helps protect your fabrics by reducing wash agitation speed during the last few minutes of wash agitation in the Normal and Permanent Press cycles.

RINSE

Fill

Rinse

u-+- Drain-No agitation

w Spin-Spray rinse

Spin

MAGIC CLEAN” lint filter

The lint filter at the bottom of the washer basket cleans itself. During agitation, wash and rinse water passes over the filter, separating the lint from the water. The lint is then spun away from the filter and out of the system during the spin part of the cycle.

If your washer drains into a tub, remove any lint collected in the tub or strainer.

MAGIC CLEAN

Basket

lint filter

interior

10

Page 10
Image 10
Whirlpool 3363569 warranty Understanding what happens in each cycle, Magic Clean lint filter, Wash, Rinse