Adding liquid chlorine
Use your washer’s liquid chlorine bleach dispenser to add bleach to the wash load. Always measure liquid chlorine bleach. Do not guess. Never use more than 1 cup
(250 ml) for a full load. Use less with lower water level settings. Follow manufacturer’s directions for safe use. Use a cup with a pouring spout to avoid spilling.
1.Load the washer.
2.Pour measured chlorine bleach carefully into the dispenser. Do not let bleach splash, drip, or run down into washer basket. Undiluted bleach will damage any fabric it touches.
3.Start the washer. Bleach will be diluted automatically during wash part of cycle.
bleach
NOTE: Do not use this dispenser to add powdered chlorine or color safe bleach to your wash load. The dispenser is for liquid chlorine bleach use only.
Adding liquid fabric softener
1.Add detergent and load clothes into the basket.
2.Pour liquid fabric softener into the dis- penser using the amount recommended on the package. Avoid dripping or spilling any fabric softener on the load.
3.Dilute fabric softener with warm water. Fill dispenser with warm water until liquid reaches the cross bar in the opening.
4.Start the washer. Diluted fabric softener will be added to the load during the final rinse.
NOTE: Do not stop the washer before the rinse part of the cycle begins. Staining can occur.
5.Flush dispenser periodically with warm water, as illustrated.
l To remove the dispenser, grasp the top of the dispenser with both hands. Squeeze and push upward with thumbs to remove.
l Clean dispenser by holding under water faucet. Replace after cleaning.
NOTE: Do not wash clothes with this dispenser removed. Do not add detergent
or bleach to dispenser. The dispenser is |
|
for liquid fabric softener use only. | 11 |
