5. Error Messages
The following numbers or letters on the Function Number Display indicates a malfunction in the imprinter.
Function | Function |
Description: Document jammed in the imprinter.
How to solve: Remove the jammed documents referring to
“3.5. Removing Jammed Documents”.
Function | Function |
Description: The Imprinter cover or ADF cover is open.
How to solve: Close the Imprinter cover or ADF cover firmly.
Function | Function |
Description: The print cartridge is not installed.
How to solve: Open the print cartridge cover and confirm that the print cartridge is installed correctly.
Function | Function |
Description: No document is detected in the imprinter.
How to solve: Confirm that document pages are sent correctly into the ADF and no document has jammed on the way.
Confirm that the character print position designated by the scanner driver is not out of the document page.
If document is not correctly sent into the ADF, reset the document again.
If some documents are jammed on the way, remove the jammed documents, refer to “3.5. Removing Jammed Documents”.
If the position designed to print letters is out of the page sheet, set the position above the page by the scanner driver.
Function | Function |
Description: A problem occurred to the Imprinter.
How to solve: cOpen the print cartridge cover and confirm that the print cartridge has been installed correctly.
dTurn off the scanner and then turn it on again. (If the problem occurs again, contact the store where you purchased the imprinter or contact an authorized FUJISTU scanner service provider.)
Function | Function | Function |
Description: The imprinter fuse has blown out.
How to solve: Contact the store where you purchased the scanner, or contact an authorized FUJITSU scanner service provider.
ATTENTION | For other errors, refer to |
| Operator’s Guide” included in |
| Manual |
16