3. Basic Operation
3.1. Positioning the Print Cartridge
To Position the print cartridge for printing:
1.Open the Print Cartridge Cover.
2.Slide the print cartridge holder, as below, to the left or right within the document width to set it at a suitable print starting position.
HINT |
| ● The small “▲” protruding from the upper right |
|
| hand side of the print cartridge tray handle |
|
| indicates the beginning print position on the |
|
| |
|
| page. |
●Above the print cartridge tray are document paper size markings; please use them to adjust for printing positions.
●Put the actual document in the ADF and confirm that the print cartridge is positioned within the document’s width.
3.2. How to Use the Paper Guides
Use the Paper Guides to prevent against paper jams due to curling of the edges, as shown below.
Feed direction
Place the Paper Guides at the ends where the paper edges will pass through.
1.Insert the document in the scanner.
2.Open the Print Cartridge Cover.
3.Slide the Paper Guides to the left and right of the page edges.
| Paper Guide |
HINT | When you wish to print on the near the edges of |
| a wide width paper, remove the Paper Guide in |
| order to open space for the Print Cartridge, and |
| attach it at the center. |
| For Right Side Edge Printing |
For Left Side Edge Printing
ATTENTION | Be careful not to let the Paper Guide touch or |
| catch onto the print circuit film. |
