Dell fi-565PR manual Specifications

6. Specifications

Item			Specification
Printing Method	Thermal inkjet printing
Print Timing	Post printing
Printing Characters	Alphabet		: A to Z, a to z
	Numeric Characters : 0, 1 to9
	Symbols		: ! ” $ # % & ’ ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _` { } ~
Maximum number of	Maximum 40 characters
characters per line
Print orientation	0º, 180º (horizontal orientation), 90º, 270º (vertical orientation)
Character size	Height 2.91mm × width 2.82mm (horizontal orientation) / 0.1146 × 0.1110 (inches),
	Height 2.82mm × width 2.91mm (vertical orientation) / 0.1110 × 0.1146 (inches)
Character pitch	3.53mm (0.1390inches)
Document that can	Documents supported by fi-5650C
be scanned	For the details, please refer to “fi-5650C Image Scanner Operator’s Guide”-“Chapter 8
	Document Specification for the ADF.”
		ATTENTION	Documents with glossy surface such as thermal paper, thermal transfer paper,
			coated paper, and art paper take longer time for the ink to dry and may cause poor
			print quality. The imprinter must be cleaned more frequently if you use these types of
			papers.

Printing area

D		A=5mm
		B=5mm
		C=5mm
		D=5mm
	Feed	(0.20inches)
Printing Area			Do not print less than 5mm of
(Back side)		ATTENTION
	direction		the page margins.
C
A		B

Dimension	Without Scanner : 413(W) × 164(D) × 246(H) mm / 16.26(W) × 6.46(D) × 9.69(H) inches
	With Scanner : 428(W) × 746(D) × 296(H) mm / 16.85(W) × 29.37(D) × 11.65(H) inches
Weight	5 kg (11.02 lbs)
Ambient condition	Temperature: 10 to 35ºC (50 to 95ºF), Humidity: 20 to 80%
Consumable	Print Cartridge (P/N: CA00050-0262)
	Replacement Cycle : 4,000,000 characters
	(The number of characters may decrease depending on the font selection.)

fi-565PR Imprinter Operator’s Guide 17