10. Close the print cartridge cover.
2.3. Operating Test
After installing the imprinter, test to see if printing can be performed on the Offline Print Test mode.
1.While pressing the [Function] button (U or V) on the operator panel, switch on the scanner.
Continue pressing on the [Function] button.
2.Release the [Function] button when the Function Number Display changes from [P] to [b].
Function | Send to | Scan |
| ||
Function Number | Function | Function |
|
| |
Display |
|
|
[Function] button |
|
|
3.Place a blank document on the ADF paper chute.
ATTENTION | ● Use A4 or Letter size paper. If the size is |
| smaller than A4 or Letter, printing may not |
| successfully complete. |
●Confirm that the Print Cartridge is positioned within the document width.
4.Press [Scan] button to test.
ÖPaper will feed into the ADF, and the Imprinter will print out the Print Test Characters starting at 5mm from the paper’s edge.
HINT | Print test patterns |
Test pattern 1 (Horizontal): ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`00000000
Test pattern 2 (Horizontal）: abcdefghijklmnopqrstuvwxyz{}~ 00000000
Test pattern 3 (Horizontal):
!”#$%&()*+,-./0123456789:;<=>?@00000000
Test pattern 4(Vertical): ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`00000000
Test pattern 5 (Vertical): abcdefghijklmnopqrstuvwxyz{}~ 00000000
Test pattern 6 (Vertical):
When multiple sheets of documents are placed in the ADF, the Test Print repeats patterns from 1 through 6.
The numbering data portion “00000000” changes from 0 (Zero) with increment of 1(one).
(One test pattern is printed at a time. Press the [Scan] button to continue printing the next test pattern.)
Feeding direction
5mm
c d e f g h
Print Test Sample
5.To stop Offline Print test mode, turn off the Scanner.
8
