OPERATING YOUR WASHER
USING YOUR WASHER (CONT.)
4.(OPTIONAL STEP) Pour measured liquid fabric softener into the fabric softener dispenser.
• Do not spill or drip any fabric softener on the clothes.
• Make sure you use only liquid fabric softener in this dispenser.
7.Set the Water Temperature selector to the correct setting for the type of fabric and soils being washed.
• Use the warmest water safe for fabric.
•Dilute liquid fabric softener by filling the dis-
penser with warm water until liquid reaches the crossbar in the opening.
• Softener is added automatically during the rinse portion of the cycle.
5.Close the washer lid.
6.Turn the Load Size selector to the correct setting for your wash load and the type of fabric being washed.
• Your washer has five load size settings.
• Choose a load size that allows the load to move freely for best fabric care. See the “Loading” section.
• Change the setting after the washer has started filling by turning the selector to a different setting.
•Follow garment label instructions.
HOT: 130°F (54°C) or above.
–Whites and pastels.
–Heavy and greasy soils.
WARM: 90 to 110°F (32 to 44°C).
–Bright colors.
–Moderate to light soils.
COLD: 70 to 90°F (21 to 32°C).
–Colors that bleed or fade.
–Light soils.
8.(OPTIONAL STEP) For an additional rinse and spin at the end of a wash cycle, set the Extra Rinse selector to On.
9.(OPTIONAL STEP) Set the Cycle Signal selector to On if you want your washer to sound a signal when the wash cycle is finished. This signal is helpful when you are washing items that should be removed from the washer as soon as the cycle ends.
6
