Completing Installation
Need Assistance?
17 l CHECK ELECTRICAL REQUIREMENTS. BE SURE YOU HAVE CORRECT ELECTRiCAL SUPPLY AND
RECOMMENDED EARlHING METHOD.
installed. If there is an extra part, go back through steps to see which step was skipped.
Call your dealer or local authorized service company.
When YOU call, YOUwill need the washer model*numbe; &d serial number. Both numbers are on the model/serial rating plate located under the washer lid and on the top of the washer.
19 l Turn on water faucets and check for leaks. Tighten couplings if there is leaking. DO NOT OVERTIGHTEN; this could cause damage to couplings.
your tools. Check that the shipping strap was removed from the back of the washer and used to secure the drain hose.
21 l Untape and plug power supply cord into earthed outlet.
22 l Read the Use and Care Guide. Start the washer and allow it to complete the regular cycle.
Congratulations!
You have successfully installed your new Whirlpool washer. To get the most efficient use from your new washer, read your Whirlpool Use and Care Guide.
Keep installation Instructions Land Guide.
Part No. | 3948875 | Prepared by Whirlpool Corporation, Benton Harbor, Michigan 49022 |
|
0 1995 | Whirlpool Corporation | Printed in U.S.A. |
