Digital Tigers SideCar MMS Series Stage 2. Install SideCar chassis driver PC Card version only

Stage 2. Install SideCar chassis driver (PC Card version only*)

1.After restarting your system (as prompted by Windows after installing a PCI to PCI bridge), insert the SideCar installation CD.

2.A setup program should launch. (On notebooks with autorun disabled, browse to the CD and launch Setup.exe from the root directory of the CD). Follow the Setup program prompts.

*SideCar chassis driver is not required for SideCar versions using a PCI adapter interface as a substitute for the PC Card interface. The PCI adapter forms a PCI-to-PCI bridge and is supported natively by Windows 2000 / XP by accepting an automatic installation wizard. However, display drivers are still required. Power up your computer, insert the installation CD, cancel the Setup program shown below, and skip to the PCI bridge section.

23- WINDOWS XP/2000 DRIVER INSTALLATION