Operating Instructions
2. CONVOTHERM PC-HACCP
page 1
2.1 Installing, Setting Up and Starting the Software
1.Install the CONVOTHERM
2.This software can manage two "networks" of one Combi each as a
3.For each of the networks used, the interface (COM) port must be selected.
4.In the selected (see below) network, each Combi used for recording HACCP data or for transferring Programs must be logged in.
2.1.1Installing CONVOTHERM HACCP Software on a PC 1. Start Windows 95 or Windows NT on the PC.
2. End all other programs before installing the Convotherm software.
3. Insert the installation
4. Use Windows Explorer to navigate to the
5. Open the SETUP.EXE installation program.
6. Follow the instructions in the installation program.
• The required directories are created automatically.
7.When installation is complete, start the program in Explorer by clicking on
•If there is an error beep when the program starts, correct the network interface, and see 2.1.2.
8.In the window Responsible chef, in the field new, enter the name of the person responsible for the HACCP documentation.
9.Click add.
10.Click OK to save or Cancel to quit without saving.
10 July 2006 | CONVOTHERM |