Cleveland Range PC-Control, PC-HACCP Other Functions, Click Pre-programmed values, Enable, July

Models: PC-HACCP PC-Control

1 24
Download 24 pages 17.51 Kb
Page 24
Image 24
3.5 Other Functions

Operating Instructions

3. CONVOTHERM PC-Control

page 10

3.5 Other Functions

3.5.1Changing the Pre-programmed Values in the PC-Control Program 1. Click Options.

2. Click Pre-programmed values.

3. Scroll through the values and change with the arrow keys, or enter new values as needed.

4. Click OK or Cancel to quit without saving.

Notes:

By pressing the Standard button, all the Pre-programmed values are reset to their factory default values without warning.

The Auto/Memo values in the individual Combis do not change and the Pre-programmed values do not affect the Auto/Memo values in the Combis.

3.5.2Enable or Disable Controls on a Combi Disable:

1. Click Options.

2. Click Locking out control panel.

3.Click the controls to be disabled. The disabled controls turn grey with grey symbols and a yellow key.

4.Select the Combis to be locked out in the Status / Device-namefield.

5.Click Lock to confirm or click Cancel to quit without saving.

Enable:

The controls can be enabled again by clicking Unlock.

3.5.3 Send a Cookbook by e-Mail

If your PC has a modem and an Internet connection, you can use the e-Mailfunction to send your Cookbook to other people or to receive one from them.

1.Click File.

2.Click e-Mail.

3.Refer to your e-mail program to insert and send PrgData.prg.

4.To send the Notes by e-mail, insert the file PrgData.menu into the e-mail.

5.Follow the program directions to send the files.

10 July 2006

CONVOTHERM PC-Control

Page 24
Image 24
Cleveland Range PC-Control Other Functions, Click Pre-programmed values, Enable or Disable Controls on a Combi Disable