Cleveland Range Introduction, General Information for CONVOTHERM PC-HACCP and, July

Operator's Manual

Page 1

1.INTRODUCTION

1.1General Information for CONVOTHERM PC-HACCP and

CONVOTHERM PC-CONTROL

CONVOTHERM PC-HACCP and CONVOTHERM PC-CONTROL

•The PC uses the PC-HACCP software to communicate with the Combi or Combis.

•The PC-HACCP software must be started on the PC before the PC-Control software can work.

CONVOTHERM PC-HACCP

•The Convotherm PC-HACCP software automatically records all processes run on Convotherm Combis and stores them for HACCP monitoring.

•After cooking, the HACCP data is stored and can be graphed for review.

CONVOTHERM PC-CONTROL

•The Convotherm PC-Control software can store up to 250 recipes. The recipes can be transferred to all your networked Combis in seconds.

•Recipes can be deleted, copied, or changed as needed.

•Stored recipes and functions including Cook & Hold, Delta-T Cooking, reduced fan speed, reduced power, Crisp ‘n’ Tasty, and security can be programmed with HACCP criteria and monitored with the Convotherm PC-HACCP software.

1.2 System Requirements

Hardware

Convotherm oven single installation:

All Combi models require ST 5000 V2.20 software.

Convotherm oven network installation:

All Combi models require ST 5000 V2.20 software.

All Combi models require a Communication Module Kit.

Computer Hardware:

•IBM compatible PC with a 486 MHz or faster processor.

•RS232/V24 serial port.

•Windows 95 or higher.

•CD-ROM drive.

•10 MB free storage on the hard drive.

10 July 2006 Introduction