Cleveland Range PC-Control Assigning HACCP Criteria to Programs Recipes, Click Program list, July

Operating Instructions

2. CONVOTHERM PC-HACCP

page 7

2.3 Assigning HACCP Criteria to Programs (Recipes)

•Each Combi can store up to 250 Programs (recipes).

•CONVOTHERM PC-HACCP software can manage only 250 Programs with up to 9 steps in each.

•The same recipes must match the same number in all the networked Combis. (For example, "grill chicken" is Program number 5 in all the networked Combis).

•Different Programs can be stored in networked Combis.

•Do not use the same number for different Programs. Instead, use the same number for the same Program in ALL the networked Combis for a maximum of 250 Program numbers.

•In the CONVOTHERM PC-HACCP software, HACCP criteria can be allocated using these Program numbers.

•These criteria are used to check every Program when it is started on a Combi.

1.Start the CONVOTHERM PC-HACCP software.

2.Click Program.

3.Click Program list.

NOTE: Steps 4 and 5 are not necessary if the Program was created using PC-Control and a name is already allocated. If so, go to Step 6.

4.Select the Program number (Prog. No.) in the list on the left.

5.Enter the Program name.

6.Enter the HACCP criteria:

•CTC Æ Temp and time

•cooking temp Æ Temp and time

7.Click OK to save or Cancel to quit without saving.

10 July 2006 CONVOTHERM PC-HACCP