Cleveland Range PC-HACCP CONVOTHERM PC-Control, Software Installation, Setup, and Startup, July

Models: PC-HACCP PC-Control

1 24
Download 24 pages 17.51 Kb
Page 15
Image 15
3. CONVOTHERM PC-Control

Operating Instructions

3. CONVOTHERM PC-Control

page 1

3.1 Software Installation, Setup, and Startup

Running the CONVOTHERM PC-Control software requires a dongle.

For viewing Programs, the software can be run without a dongle.

Without a dongle, some functions, including saving Programs and sending Programs to the Combis cannot be used.

Installation of the Convotherm PC-Control Software

1.Insert the dongle in the parallel printer interface (LPT).

2.Install the PC-Control software using the same procedure as the PC-HACCP software.

3.For easier Program startup, place a shortcut to the PC-CONTROL.EXEon the desktop or in the Autostart directory.

3.2Create a Cookbook on the PC

After starting this program, a list containing all the Program numbers is displayed.

Free and assigned Program numbers are displayed differently in this list. See below.

= free Program number

= assigned Program number

The Programming window is opened by double clicking on a Program number.

The buttons used in this window are the same as the Keypad icons on the Combi control panel.

10 July 2006

CONVOTHERM PC-Control

Page 15
Image 15
Cleveland Range PC-HACCP CONVOTHERM PC-Control, Software Installation, Setup, and Startup, Create a Cookbook on the PC