5USING Y OUR WASHER
Understanding Washer Cycl es
When the Cycle Control knob is set to a number and pulled
out, the washer fills (to the selected load size) before
agitation and timing start. The washer begi ns agitating
immediately after filling; agitation occurs with the washer
lid up or down.
During agitation, the agitator (on some models) creates a
continuous rollover action that provides a thorough
cleaning of the wash load.
After agitation starts, the Cycle Control knob turns
clockwise until it points to an OFF area and the cycle ends.
NOTE: The washer pauses briefly throughout each cycle.
These pauses are normal for washer operation.
For these suggested full-sized loads, set the LOAD SIZE
selector to the highest load size setting.
1. Fill 1. Fill
No agitation 3. Drain
4. Spin 4. Spin-Spray
† The Permanent Press
cycle partially drains, fills,
agitates briefly, and
SUPER CAPACITY PLUS WASHERS
Heavy Work Clothes
3 pair pants
4 pair jeans
1 quilted robe
1 baby’s dress
10 bath towels
10 hand towels 14 wash cloths
1 bath mat
3 double sheets
6 pair shorts