Using Your Refrigerator
Continued
Changing the light bulbs
To change refrigerator light:
1. Disconnect refrigerator from power supply.
2. Reach behind the Control Console to find bulb(s).
3. Remove bulb.
4. Replace with a
NOTE: Not all commercial appliance bulbs will fit your refrigerator. Be sure to replace bulb with one of the same size and shape.
Reversing the door swing
You can change the hinges on your refrigerator so the doors open the other way. Refer to the instruc- tions sheet included with your refrigerator.
Ice cube trays
If cubes are not used, they may shrink. The moving cold air starts a slow evaporation. The longer cubes are stored, the smaller they get.
To remove ice:
1. Hold tray at both ends.
3. Twist slightly.
Optional automatic ice maker
If you have the automatic ice maker accessory, or if you plan to add one later (Part No.
l The ON/OFF lever is a wire signal arm. Down...for making ice automatically. Up...to shut off the ice maker,
NOTE: Do not turn ice maker on until it is connected to the water supply. Instructions for ice maker water supply
. The dial or lever on the side of the ice maker changes the size of the cubes.
l Shake the bin occasionally to keep cubes sepa- rated and to obtain increased storage capacity.
. It is normal for ice crescents to be attached by a corner. They will break apart easily.
8
