If washer/drver
does not opkate...
If you need | When moving the |
assistance... | washer/dryer.. . |
l Check that the circuit breaker is not tripped or the house fuse blown.
l Check that power supply cord is plugged into wall receptacle.
l Check that washer lid or dryer door is closed.
l Check that controls are set in a running or ‘ON” position.
l Check that dryer ‘START” button has been firmly pushed.
Part No. 3397516 |
|
01995 Whirlpool Corporation | Prepared |
Call your dealer or local authorized service company.
When you call, you will need the washer/dryer model number and serial number. Both numbers can be found on the model/serial rating plate located behind the dryer door on the dryer door well.
by Whirlpool Corporation, Benton Harbor, Michigan
l
l
l
l
Disconnect the power supply cord. Tape power supply cord securely to washer/dryer.
Tape the dryer drum to the front panel. Tape the lint screen in place. Tape the dryer door closed.
Wedge a blanket between the tub ring and cabinet top to restrict washer tub movement.
Turn front leveling legs all the way in.
Printed on recycled paper. 10% post consumer waste/ 50% recovered materials.
49022 | Printed in USA, |
