Changing the control
If you need to adjust temperatures in refrigerator or freezer, use the settings listed in the chart below as a guide.
settings
l Adjust the Refrigerator Control first.
l Wait at least 24 hours between adjustments. l Then adjust the Freezer Control if needed.
_______ | - | - | - | - | I_ |
CONDITION: | REASON: |
| RECOMMENDED |
|
CONTROL SElTINGS: | ||||
|
|
Refrigerator section too warm
Freezer section too warm
l | Door | opened | often | Refrigerator | 4 |
l | Large | amount | of food added | Freezer | A |
l Room temoerature too warm |
|
| |||
l | Door | opened | often | Refrigerator | 3 |
l | Large | amount | of food added | Freezer | C |
l Very cold room temperature |
|
| |||
| (can’t | cycle often enough) |
|
|
Refrigerator | l | Controls not | set correctly | |||
section |
| for your | conditions | |||
too | cold |
|
|
|
|
|
Ice | not | l | Heavy | ice usage | ||
made fast | l Very cold room temperature | |||||
enough |
| (can’t | cycle | often enough) | ||
Both | l | Door | opened | often | ||
sections | l | Large | amount of food added | |||
too | warm | l | Very warm or very cold room | |||
|
|
| temperatures |
|
Refrigerator 2,
FreezerB ’
Refrigerator 3
FreezerC
Refrigerator 4
FreezerB
Removing the door shelf fronts (on some models)
Remove the door shelf fronts for easier cleaning.
To remove shelf fronts:
1.Remove all items from the shelf.
2.Pull out on the inside tab at each end of the shelf front.
3.Pull shelf front straight out.
To replace shelf fronts:
1.Line up each end of the shelf front with the button on the door liner wall.
2.Push shelf front straight back until it snaps securely into place.
3.Replace items on the shelf.
9