Installing it properly
1.Allow 1.25 cm (I,$ inch) space on each side and at the tfop of the refrigerator for ease of installation.
2.If the refrigerator is to be against a wall, you might want IO leave extra space on the hinge side closest to the wall so the door can be opened wider.
3.The refrigerator can be flush against the wall.
4.Make sure ice maker water supply has been connected. Refer to Installation Instructions.
Leveling it
Your refrigerator has 2 front leveling
1.Remove base grille. (See page 20.)
2.To raise front, turn screw clockwise.
3.To lower front, turn screw counterclock- wise.
4.Check with level.
5.Replace base grille. (See page 20.)
