Installing it properly
1.Allow 1.25 cm (% inch) space on each side and at the top of the refrigerator for ease of installation.
2.If the refrigerator is to be against a wall, you might want to leave extra space on the hinge side closest to the wall so the door can be opened wider.
For 3VED29DQ only: A minimum of 2.9 cm (1 ‘/s inch) between the refrigerator door and wall is required, or a minimum of 3.8 cm (1% inch) between the freezer door and wall is required.
3.The refrigerator can be flush against the wall.
4.Make sure ice maker water supply has been connected. Refer to Installation Instructions.
Leveling it
Your refrigerator has 2 front leveling
1.Remove base grille. (See page 16.)
2.To raise front, turn screw clockwise.
3.To lower front, turn screw counterclock- wise.
4.Check with level.
5.Replace base grille. (See page 16.)
Right to raise; left to lower
Use a screwdriver