Whirlpool 3VED29DQ Changing the control settings, Adjusting the refrigerator shelves

Changing the control settings

If you need to adjust temperatures in

refrigerator or freezer, use the settings listed in the chart below as a guide.

l

l

l

Adjust the Refrigerator Control first.

Wait at least 24 hours between adjustments.

Then adjust the Freezer Control if needed.

CONDITION:	REASON:
If Refrigerator	Door	opened	often
Section is	Large	amount	of food added
TOO WARM	Room	temperature too warm
If Freezer	Door	opened	often
Section is	Large	amount	of food added
TOO WARM	Very	cold room temperature
	(can’t cycle of-ten enough)

RECOMMENDED CONTROL SETTINGS:

Refrigerator

Freezer:

Refrigerator

Freezer:

If Refrigerator	Controls	not set correctly	Refrigerator	2
Section is	for your	conditions	Freezer	B
TOO COLD

If ICE	isn’t	Heavy ice		usage
MADE	FAST	Very	cold	room temperature
ENOUGH		(can’t	cvcle often enouah)
If BOTH		Door	opened		often
SECTIONS		Large	amount		of food added
are TOO WARM		Very warm or very cold room
		temperatures

Refrigerator

Freezer

Refrigerator 4

FreezerB

Adjusting the refrigerator shelves

Shelves can be adjusted to match the way

you use your refrigerator. Glass shelves are strong enough to hold bottles, milk and other heavy food items.

To remove glass shelves:

1.Remove items from shelf.

2.Slide shelf out with an even, constant pull.

3.Lift front and slide the rest of the way out.

To move shelf guides to a new position:

1.Lift front of guide. Pull guide forward off rear support. Repeat for other guide.

2.To replace guide, push guide onto rear support. Push front of guide down onto support.

To replace glass shelves:

1.Guide rear of shelf into shelf guide.

2.Slide shelf into place.

Be careful when handling glass items.

8