Before Using Your
Refrigerator
In This |
| Section | Page |
|
|
| Page |
|
|
|
|
|
| ||
Cleaning | it | .................................................... | ....... 5 | Installing | it properly | _ | ............................ 5 |
Plugging | it | in | ....... 5 | Leveling | it | ........................... 6 | |
It is important to prepare your refrigerator for use. This section will tell you how to clean it, connect it to a power source, install it and level it.
Cleaning it
Clean your refrigerator before using it, if neces- sary. See cleaning instructions on page 18.
Recommended Grounding Method
A 220 or 240 Volt, 50 Hz., AC only 15 or 20 ampere fused and properly grounded electrical supply is required. It is recommended that a separate circuit serving only this appliance be provided. Use a receptacle which cannot be turned off with a switch or pull chain. Do not use an extension cord.
Installing it properly
1.Allow 1.25 cm (I/Z inch) space on each side and at the top of the refrigerator for ease of installation.
2.If the refrigerator is to be against a wall, you might want to leave extra space on the hinge side closest to the wall so the door can be opened wider.
For ED27DQ only: A minimum of 2.9 cm (1 YEinch) between the refrigerator door and wall is required, or a minimum of 3.8 cm
(1% inch) between the freezer door and wall is required.
3.The refrigerator can be flush against the wall.
4.Make sure ice maker water supply has been connected. Refer to Installation Instructions.
