Changing the control
If you need to adjust temperatures in refrigerator or freezer, use the settings listed in the chart below as a guide.
settings
l Adjust the Refrigerator Control first.
l Wait at least 24 hours between adjustments. l Then adjust the Freezer Control if needed.
I | CONDITION: | REASON: |
|
| |
|
|
| |||
| If Refrigerator | Door | opened | often | |
| Section is | Large | amount | of food added | |
| TOO WARM | Room | temperature | too warm | |
| If Freezer | Door | opened | often | |
| Section is | Large | amount | of food added | |
| TOO WARM | Very | cold room temperature | ||
|
| (can’t | cycle often | enough) | |
RECOMMENDED CONTROL SETTINGS:
Refrigerator 4
FreezerA
Refrigerator 3
FreezerC
If Refrigerator | Controls | not | set correctly | |||
Section is | for your | conditions | ||||
TOO COLD |
|
|
|
|
| |
If ICE | isn’t | Heavy | ice | usage | ||
MADE | FAST | Very cold | room temperature | |||
ENOUGH | (can’t | cycle | often enough) | |||
If BOTH | Door | opened | often | |||
SECTIONS | Large | amount of food added | ||||
are TOO WARM | Very warm or very cold room | |||||
|
| temperatures |
| |||
Refrigerator 2
FreezerB
Refrigerator
Freezer
Refrigerator 4
FreezerB
Adjusting the refrigerator shelves
Shelves can be adjusted to match the way you use your refrigerator. Glass shelves are strong enough to hold bottles, milk and other heavy food items.
To remove glass shelves:
1.Remove items from shelf.
2.Slide shelf out with an even, constant pull.
3.Lift front and slide the rest of the way out.
To move shelf guides to a new position:
1.Lift front of guide. Pull guide forward off rear support. Repeat for other guide.
2.To replace guide, push guide onto rear support. Push front of guide down onto support.
To replace glass shelves:
1.Guide rear of shelf into shelf guide.
2.Slide shelf into place.
Be careful when handling glass items.
