Operating Your Washer
To obtain the best washing results, you must operate your washer properly. This section gives you this important information. Page references are included for more information. NOTE: Before using your washer, remove the consumer Features Guide from your washer and place it with your Use and Care Guide.
Starting your washer
1.Add measured detergent to the washer. Then place a sorted load of clothes in the washer. See page 12 for sorting information.
2.Select a load size setting that corre- sponds to the size of your wash load and the type of fabric being washed. See page 12 for loading tips.
Your washer has either a slide or rotary knob Load Size Selector.
lIf your washer has a slide Load Size Selector, choose a setting anywhere on or between the extra small and extra large settings.
To change the load size setting after the washer has started to fill, first slide the Selector to RESET, then to the desired new setting.
lIf your washer has a rotary knob Load Size Selector, turn the Selector to any setting between Ex Small and Ex Large.
To change the load size setting after the washer has started to fill, turn the Selector to the desired new setting.
3.Select a
lYour washer has one of the Water Temperature Selectors shown: Rotary knob, Pushbutton, or CLEAN TOUCH.
l
l
For all types of Selectors, five wash/ rinse temperatures are available. The top temperature is the wash water, and
the bottom temperature is the rinseCLEAN TOUCHTM water.
See page 14 for water temperature tips.
5
