PREPARATION | Be sure to remove the power plug from the wall outlet. |
|
FILTER INSTALLATION
To maintain the quality of the filters, they are placed in the main unit within plastic bags. Be sure to remove the filters from the plastic bags before using the unit.
1 Filters Removal
1 Place the unit facing up
Lay the unit on a flat surface such as a table, making sure that the stand does not contact the surface.
Place so that stand does not touch surface.
Soft cloth | Table, etc. |
|
1
2 Remove the Front Panel
Press in the hook on the bottom of the Front Panel and lift to re- move.
2
1Hook
Front Panel
2 
1
3 Remove the
The Washable Active Carbon Filter is reinforced with cardboard to prevent it losing its shape.
Washable Active Carbon Filter
INSERTING BATTERIES IN THE REMOTE CONTROL
1 Remove the back cover
Press and slide the back cover to re- move.
2 Insert batteries Insert batteries with 
and 
as shown
below.
3 Closecover the back
Battery Information
•The batteries for this remote control are for ini- tial use only . Change the batteries when nec- essary.
•Incorrect usage of the batteries may cause bat- tery fluid leakage and/or damage.
Take care of the following when handling:
•When replacing the batteries, replace both bat- teries with new ones of the same type. (Use 2 AA manganese batteries.)
•When not using the unit or remote control for an extended period, remove the batteries. (This prevents malfunction of the remote control from battery fluid leakage.)
•The batteries of the accessory are for initial use only and may be depleted within 1 year.
