Sharp FP-N40CX operation manual Part Names, Main Unit Display, CLEAN-SIGN Light

PART NAMES

MAIN UNIT DISPLAY

Filter Indicator Light

If the Filter Indicator Light is lit, the Washable Active Carbon Filter needs to be cleaned.

	AUTO Operation			Fan Level			Pollen Mode		OFF Timer Display Indicator Lights
	Indicator Light			Indicator Light			Indicator Light		(set using remote control)
	FILTER		AUTOSILENT MED		HIGH MAX POLLEN		CLEAN-SIGN		OFF	TIMER
											Plasmacluster
						CLEAN-SIGN LIGHT
						The color changes according to the air condition.
		Remote Control Receiver				Clean (Green)		Slightly Impure (Orange) Very Impure (Red)
Odor Sensor
						ABOUT THE CLEAN-SIGN
• Detects odors such as tobacco
smoke, pets, cosmetics, etc.						• The Odor sensor displays a CLEAN-SIGN depending on relative
• It can not detect odorless pollen						changes to the environment from the time the power plug is inserted
and dust.						into the wall outlet and thereafter.

•When the air is extremely impure at the time the power plug is in- serted, the CLEAN-SIGN may light green since the impure condition is the environment against which the sensor bases the impurity rate on. In this case, operate the unit for a while in Clean Mode first, then switch to the desired operation mode. See Page E-13

•To reset the base impurity rate of the CLEAN-SIGN remove and in- sert the power plug.

•The light can be turned off using ‘Display ON/OFF’ Button on the re- mote control. Please turn off the light it is not needed. See Page E-13

MODE-ON/OFF Button See Page E-12

(Used to select operations or turn the unit off)

Main Unit

Band See Page E-11

True HEPA Filter (white) See Page E-17

(Dust Collection Filter with Anti-Bacterial Apa- tite Filter sheet covering its front surface)

Washable Active Carbon Filter (black)

See Page E-14

(Deodorization filter)

Pre-Filter

Front Panel

Remote Control See Page E-13

Hook

Stand See Page E-9

(Be sure to mount for tabletop installation)

Thumbscrew

E-8