PLASMACLUSTERINDICATORLIGHT

Plasmacluster ion operation is selected using the remote control.

Blue light

When the Plasmacluster ion operation is in Clean Mode, or in AUTO Plasmacluster Ion Mode and the air in the room is impure, the light will activate and the unit will operate in Clean Mode.

Green light

When the Plasmacluster ion operation is in the Ion Con- trol Mode, or in AUTO Plasmacluster Ion Mode and the air in the room is clean, this light will activate and the unit will operate in Ion Control Mode.

Light off

There are no Plasmacluster ions being generated.

The light can be turned off by using the ‘Display ON/ OFF Button’ on the Remote Control.

(Please turn off the light when not required.)

BACK

Handle

Air Outlet

 

Power Cord

 

Power Plug

ACCESSORIES

 

Remote Control

Battery

(1 unit)

(AA battery X 2 )

MOUNTING THE STAND

Please mount the stand before use.

1 Remove the Front Panel.

At this time, also remove the Pre-Fil- ter, Washable Active Carbon Filter and the True HEPA Filter.

Front Panel

1

2

1

2 Place the unit with its front side facing down on a flat and stable surface.

Place a soft cloth, etc., to prevent damaging the unit.

3 Insert the tabs on the stand into the holes on the main unit and fix the stand using the included thumbscrews (2 units).

Do not insert the thumbscrews forci- bly or diagonally. Otherwise, the screws may not be tightened correctly.

Tabs Holes

ENGLISH

Stand (1 unit)

Thumbscrews (2 pieces)

 

Located on bottom of stand

 

• Operation manual

Thumbscrews

E-9

Page 11
Image 11
Sharp FP-N40CX operation manual Mounting the Stand, Plasmaclusterindicatorlight, Back, Accessories, Remove the Front Panel