Sharp FP-N40CX operation manual Filter Cleaning, E-15

Models: FP-N40CX

1 44
Download 44 pages 4.25 Kb
Page 17
Image 17
FILTER CLEANING

6 Dry the filter out- doors if possible in a well ventilated area.

CAUTION

Let the filter dry thoroughly.

If used while the filter is still moist, then the air that is exhausted from the main unit will have an odor. It may take 1 or 2 days to dry.

Dry the filter outdoors in a well ventilated area. If dried indoors, it may give an odor. In addi- tion, the water dripping off the filter may soil your floor.

Make sure that the activated carbon has not shifted to one side inside the filter. If it has, dis- tribute it evenly with your fingers.

Dry the filter as shown in the above illustration. The wet filter is heavy. Fix it securely for drying to make sure it does not fall down.

The filter takes longer to dry in winter, on rainy days. Wash it on a day when the weather is good and dry it in the sun.

Move it indoors at night to prevent freezing.

7 Reinstalling the Filter and Restart Reinstall the filter as shown on Page E-11.

The filter air may have an odor until the filter is completely dry.

8 Once the Washable Active Carbon Filter has been cleaned, connect the power cord to the outlet and use a pointed instrument to activate the Fil- ter Reset on the Remote Control, pointing the Remote Control toward the receiver on the main unit,

(Refer to page E-13)

Once the Filter Reset Button has been acti- vated, you will hear a beep sound that means that the unit has been reset.

The Filter indicator light will then go out auto- matically.

Filter Reset Button

RESET

FILTER

ON/OFF

 

ER

 

POW

OFF

 

TIMER

FILTER CLEANING

Clean the top surface of the Pre-Filter lightly with a vacuum cleaner.

Pre-Filter

NOTE

The True HEPA Filter is damaged eas- ily. Do not bring it into direct contact with the nozzle of a vacuum cleaner or wash it with water. The True HEPA Fil- ter should never be washed or cleaned.

ENGLISH

E-15

Page 17
Image 17
Sharp FP-N40CX operation manual Filter Cleaning, E-15

FAQ

Can I dry the filter indoors?

It is recommended to dry the filter outdoors in a well ventilated area to prevent odor and potential floor soiling.

How long does it take for the filter to dry?

It may take 1 or 2 days for the filter to dry, especially in winter or on rainy days.

Can I wash the True HEPA Filter with water?

No, the True HEPA Filter should never be washed or cleaned as it is easily damaged.

What is the purpose of the Filter Reset Button?

The Filter Reset Button is used to reset the unit after cleaning the Washable Active Carbon Filter, and the indicator light will go out automatically.

What should I use to clean the Pre-Filter?

Use a vacuum cleaner to lightly clean the top surface of the Pre-Filter.