Sharp FP-N40CX operation manual Main Unit Operation, Main Unit Controls

For the first 30 seconds after the power plug is inserted into OPERATION the wall outlet, the unit will check the conditions of the air. If operation is set to ON during this time, the CLEAN SIGN

LIGHT will alternately flash in green, orange and red.

MAIN UNIT OPERATION

Main Unit Controls

• AUTO

• SILENT

• MEDIUM

• HIGH

• MAX

• POLLEN

MODE-ON/OFF Button

OFF TIMER

FILTER AUTO SILENT MED HIGH MAX POLLEN CLEAN-SIGN

Plasmacluster

Plasmacluster Indicator Light

The unit will start operating when the MODE-ON / OFF Button is pressed.

The unit will begin operating in the AUTO Mode. (fan level)

• While operating the Plasmacluster Indicator Light will be on.

To switch operating controls, press the MODE-ON / OFF Button until the desired control is activated. (Your desired control will have its Indicator Light lit.)

For the best results of the room environment, set your operation control as desired.

Stop

AUTO operation

The fan level is automatically switched (HIGH, MEDIUM, SILENT) depending on the amount of impurities in the air. The sensors detect the impurities for efficient air pu- rification.

POLLEN mode operation

The unit will operate at High level for 10 minutes, then will alternate be- tween MEDIUM and HIGH.

10 minutes: High fan level

20 minutes: Medium fan level

20 minutes: High fan level

SILENT operation

The unit will operate quietly using minimal air intake.

MEDIUM to MAX operation

The unit will operate at a fan level of MEDIUM, HIGH or MAX.

E-12