OPERATING YOUR WASHER

8.(OPTIONAL STEP) If desired, on models with the End of Cycle signal option, set the it to On if you want the washer to alert you when the wash cycle is complete.

If your model has an End of Cycle signal, it is either a Rotary Knob or CLEAN TOUCH* selector.

The signal is helpful when you are washing items that should be removed from the washer as soon as the cycle ends.

9.Push in the Cycle Control Knob and turn it clockwise to the wash cycle you want. See pages 9 and 10.

Off

On

Cycle Signal

Rotary Knob

OR

On Off

Cycle Signal

Options

CLEAN TOUCH

Selector

10.Pull out the Cycle Control Knob to start the washer.

11. (OPTIONAL STEP) If desired, on models with no liquid fabric softener dispenser, add measured liquid fabric softener to the rinse water.

See page 15.

Stopping/restarting your washer

To stop the washer at any time, push in the Cycle Control Knob.

To restart the washer, close the lid (if necessary) and pull out the Cycle Control Knob.

8

Page 8
Image 8
Whirlpool 7LSR8244EQ0 manual Stopping/restarting your washer