Strip 5 in. (12.7 cm) of outer covering from end of cable, leaving bare ground wire at 5 in. (12.7 cm). Cut 1¹⁄₂ in. (3.8 cm) from 3 remaining wires. Strip insulation back 1 in. (2.5 cm). Bend ends of wires into a hook shape.

When connecting to the terminal block, place the hooked end of the wire under the screw of the terminal block (hook facing right), squeeze hooked end together and tighten screw. See example below.

1. Remove center terminal block screw.

2. Remove appliance ground wire (green with yellow stripes) from external ground connector screw. Fasten it under center, silver colored terminal block screw.

1 2

3

1.External ground connector - Dotted line shows position of NEUTRAL ground wire before being moved to center terminal block screw

2.Center silver-colored terminal block screw

3.Green/yellow wire of harness

3.Connect ground wire (green or bare) of power supply cable to external ground conductor screw. Tighten screw.

4.Place the hooked end of the neutral wire (white or center wire) of power supply cable under the center screw of terminal block (hook facing right). Squeeze hooked end together. Tighten screw.

5.Place the hooked ends of the other power supply cable wires under the outer terminal block screws (hooks facing right). Squeeze hooked ends together. Tighten screws.

6.Tighten strain relief screws.

7.Insert tab of terminal block cover into slot of dryer rear panel. Secure cover with hold-down screw.

3-wire connection: Power Supply Cord

Use where local codes permit connecting cabinet-ground conductor to neutral wire:

2

4

5

1

3

7

6

1.3-wire receptacle (NEMA type 10-30R)

2.3-wire plug

3.Neutral prong

4.Spade terminals with up turned ends

5.³⁄₄ in. (1.9 cm) UL approved strain relief

6.Ring terminals

7.Neutral (white or center wire)

1.Loosen or remove center terminal block screw.

2.Connect neutral wire (white or center wire) of power supply cord to the center, silver colored terminal screw of the terminal block. Tighten screw.

23

4

3

2

1

4 5

6

1

5

1.Neutral grounding wire (green/yellow)

2.External ground connector

3.Center silver-colored terminal block screw

4.Neutral wire (white or center wire)

5.³⁄₄ in. (1.9 cm) UL-listed strain relief

3.Connect the other wires to outer terminal block screws. Tighten screws.

4.Tighten strain relief screws.

5.Insert tab of terminal block cover into slot of dryer rear panel. Secure cover with hold-down screw.

1.³⁄₄ in. (1.9 cm) UL-listed strain relief

2.Green or bare copper wire of power supply cord

3.External ground connector

4.Center silver-colored terminal block screw

5.Neutral wire (white or center wire)

6.Neutral grounding wire (green/yellow)

6

Page 5 Page 7
Page 6
Image 6
Whirlpool 8535899 installation instructions
Page 5 Page 7

8535899 specifications

The Whirlpool 8535899 is an innovative and highly efficient appliance designed to enhance the functionality of home kitchens. As a critical component in Whirlpool's extensive array of products, this particular model often serves as a replacement part, providing longevity and reliability to users.

One of the standout features of the Whirlpool 8535899 is its durability. Designed to withstand the rigors of daily use, it typically consists of high-quality materials that ensure a long lifespan. This durability is crucial for homeowners seeking a dependable appliance, as it reduces the need for frequent replacements and repairs.

The Whirlpool 8535899 is engineered with advanced technology in mind. It often incorporates user-friendly controls that make operation intuitive, allowing users to navigate settings effortlessly. This ease of use is complemented by efficient energy consumption, as the model is designed to be eco-friendly while maintaining outstanding performance. Whether it’s for cooking, food preservation, or cleaning, the appliance's efficiency translates into lower utility bills and reduced environmental impact.

Another defining characteristic of the Whirlpool 8535899 is its adaptability. This model generally fits a variety of kitchen configurations, making it suitable for both small and large homes. Its sleek design and modern aesthetic also ensure that it blends seamlessly into any kitchen decor, providing both functionality and style.

Additionally, the Whirlpool 8535899 is often equipped with features that enhance user convenience. These may include adjustable racks, quick-connect options, and versatile settings that cater to different cooking or cleaning needs. This flexibility is particularly beneficial for families that require an appliance capable of handling various tasks simultaneously.

Maintenance is a breeze with the Whirlpool 8535899 as well. Many users appreciate the easy-to-clean components that help maintain hygiene and cleanliness with minimal effort. Moreover, the availability of replacement parts further emphasizes Whirlpool's commitment to customer support and product longevity.

In conclusion, the Whirlpool 8535899 stands out in the appliance market for its durability, advanced features, energy efficiency, and user-friendly design. Ideal for those seeking a reliable home appliance, it represents a harmonious blend of innovation and practicality, making it a valuable addition to any kitchen.
Top Page Image Contents