7.Align
Depending on the thickness of your flooring, longer screws may be necessary to anchor the bracket to the subfloor. Longer screws are available from your local hardware store.
8.Move range close enough to opening to allow for electrical connections to be made. Remove shipping base, cardboard or hardboard from under range.
9.Make electrical connections as described in the “Electrical Connection” section.
10.Move range into its final location making sure rear leveling leg slides into
Electrical Connection - U.S.A. Only
Power Supply Cord
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Use a new 40 amp power supply cord.
Plug into a grounded outlet.
Failure to follow these instructions can result in death, fire, or electrical shock.
Direct Wire
11.If installing the range in a mobile home, you must secure the range to the floor. Any method of securing the range is adequate as long as it conforms to the standards in the “Location Requirements” section.
12.Continue installing your range using the following installation instructions.
Optional Rear Spacer Cover
(for
If you are installing a
Using the screws provided with the kit, attach the rear spacer cover to the sides of the range.
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Use 8 gauge copper or 6 gauge aluminum wire.
Electrically ground range.
Failure to follow these instructions can result in death, fire, or electrical shock.
1.Disconnect power.
2.Remove the terminal block cover screws located on the back of the range. Pull cover down and toward you to remove cover.
A |
B
A.
B.Terminal block cover
9