For cleaning and
maintenance...
If removing the range is necessary for cleaning or maintenance, disconnect the electric supply.
If electrical supply is inaccessible, lift the range slightly at the front and pull the range away from the wall. Pull the range out only as far as necessary to disconnect the electrical supply line.
Remove the range to complete cleaning or maintenance.
Move range back into operating position. Remove drawer. Level the range. Reconnect the electrical supply. Make sure that left rear leveling leg is engaged in the
If range does not operate:
✓Check that the circuit breaker is not tripped or the house fuse blown.
✓Check that the power supply cord is plugged into the outlet.
✓Check that gas line is turned on.
✓See Use and Care Guide for troubleshooting list.
NOTE: Refer to Use and Care Guide for operating and cleaning instructions.
If you need assistance:
If you have questions about operating, cleaning or maintaining your range:
✓Refer to Use and Care Guide.
✓Call the Customer Interaction Center. Check your Use and Care Guide for a
If you need service:
Maintain the quality built into your range by calling an authorized service company.
To obtain the name and number of the authorized service company:
✓Contact the dealer from whom you purchased your range; or
✓Look in the Yellow Pages of your telephone directory under “Appliances — Household — Major — Service and Repair;” or
✓Call the Customer Interaction Center. The
When you call, you will need:
✓The range model number.
✓The range serial number.
Both numbers are listed on the model/serial rating plate located on the frame behind the broiler door.
11
