Electrical requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

If codes permit and a separate ground wire is used, it is recommended that a qualified electrician determine that the ground path is adequate.

Do not ground to a gas pipe.

Check with a qualified electrician if you are not sure range is properly grounded.

A 120-volt, 60-Hz, AC-only, 10 amp, fused electrical supply is required. A time-delay fuse or circuit breaker is recommended. It is recommended that a separate circuit serving only this appliance be provided.

Electronic ignition systems operate within wide voltage limits, but proper grounding and polarity are necessary. In addition to checking that the outlet is correctly grounded, the outlet must be checked by a qualified electrician to see if it is wired with correct polarity.

IMPORTANT: This range is equipped with an electronic ignition system that will not operate if plugged into an outlet that is not properly polarized.

A wiring diagram is included on the back of the range.

See “Cutout dimensions/requirements” section for recommended location of electrical outlet.

Recommended ground method

For personal safety, this range is equipped with a power supply cord having a 3 prong ground plug. To minimize possible shock hazard, the cord must be plugged into a mating 3 prong, ground-type outlet, grounded in accordance with the National Electrical Code, ANSI/NFPA 70 — latest edition* and all local codes and ordinances.

If a mating outlet is not available, it is the personal responsibility and obligation of the customer to have a properly polarized and grounded, 3 prong outlet installed by a qualified electrician.

3 prong ground	3 prong
3 prong ground	polarized
plug	ground-type
	outlet

ground

power prong supply

cord

Gas supply requirements

WARNING

Explosion Hazard

Use a new AGA or CSA approved gas supply line.

Install a shutoff valve.

Securely tighten all gas connections.

If connected to LP, have a qualified person make sure gas pressure does not exceed 14" water column.

Examples of a qualified person include:

licensed heating personnel, authorized gas company personnel, and

authorized service personnel.

Failure to do so can result in death, explosion, or fire.

In the State of Massachusetts, the following installation instructions apply:

•Installations and repairs must be performed by a qualified or licensed contractor, plumber, or gasfitter qualified or licensed by the State of Massachusetts.

•If using a ball valve, it shall be a T-handle type.

•A flexible gas connector, when used, must not exceed 3 feet.

Observe all governing codes and ordinances.

This installation must conform with all local codes and ordinances. In the absence of local codes, installation must conform with American National Standard, National Fuel Gas Code ANSI Z223.1 — latest edition**.

Input ratings shown on the model/serial rating plate are for elevations up to 2,000 feet. For assistance when installing the range at higher elevations, contact your local service company.

Type of gas: This range is design-certified by CSA International for use with L.P. gas or, after proper conversion, for use with Natural gas. This range is factory set for use with L.P. gas. Gas conversion instructions are provided on pages 8–9. The model/serial rating plate located on the frame behind the broiler drawer has information on the type of gas that can be used. If the type of gas listed does not agree with the type of gas available, check with the local gas supplier. Conversion must be done by a qualified service technician.

Gas supply line: Provide a gas supply line of 3/4" rigid pipe to the range location. With L.P. gas, piping or tubing size can be 1/2" minimum. A smaller size pipe on longer runs may result in insufficient gas supply. Usually, L.P. gas suppliers determine the size and materials used in the system.

Pipe-joint compounds made for use with L.P. gas must be used on pipe threads only.

Copies of the standards listed may be obtained from:

*National Fire Protection Association

One Batterymarch Park

Quincy, Massachusetts, 02269

**CSA International

8501 East Pleasant Valley Road Cleveland, Ohio 44131-5575

98015195 specifications

The Whirlpool 98015195 is a contemporary appliance designed to enhance the kitchen experience through its innovative features and advanced technologies. This versatile model serves various functions, making it an invaluable addition to any modern household.

One of the standout features of the Whirlpool 98015195 is its spacious design, which allows users to prepare larger meals with ease. The appliance boasts a generous capacity, enabling simultaneous cooking or reheating of multiple dishes. This feature is particularly advantageous for families or those who enjoy entertaining guests, as it reduces cooking time significantly.

In terms of technologies, the Whirlpool 98015195 incorporates advanced cooking modes that ensure precision and consistency. The appliance includes settings for baking, roasting, and broiling, allowing users to achieve optimal results regardless of the cooking task. The built-in sensor cooking technology intelligently adjusts cooking times and power levels based on the food’s moisture content and temperature, ensuring perfectly cooked meals every time.

Another remarkable characteristic of the Whirlpool 98015195 is its user-friendly interface. The appliance is equipped with a digital control panel that offers an intuitive layout, making it easy for users to navigate through various functions and settings. Additionally, the appliance features a bright LED display that provides clear visibility, allowing users to monitor cooking progress at a glance.

The design of the Whirlpool 98015195 also emphasizes energy efficiency. It operates with lower energy consumption compared to traditional cooking methods, promoting environmentally friendly practices while keeping utility costs down. This focus on sustainability aligns with the growing trend of eco-conscious living.

Easy maintenance is another boon of the Whirlpool 98015195. The appliance features a non-stick interior, which simplifies the cleaning process and minimizes the effort required to maintain its pristine condition. The removable components are dishwasher safe, adding to the convenience for busy families or individuals.

In summary, the Whirlpool 98015195 is a state-of-the-art kitchen appliance that combines functionality, efficiency, and user-friendly design. With its spacious capacity, advanced cooking technologies, and commitment to energy efficiency, it is well-suited for a variety of cooking needs in today’s fast-paced lifestyle. Whether you are a culinary enthusiast or simply looking for an efficient way to prepare meals, the Whirlpool 98015195 is a worthy investment for any kitchen.

Whirlpool 98015195 installation instructions Electrical requirements, Gas supply requirements

Models: 98015195