7.Making sure the anti-tip bracket is installed:

Look for the anti-tip bracket securely attached to floor.

Slide range back so rear range foot is under anti-tip bracket.

anti-tip bracket

range foot

8.If installing the range in a mobile home, you must secure the range to the floor. Any method of securing the range is adequate as long as it conforms to the “Manufactured Home Construction and Safety Standard” section.

9.Place rack in oven. Place level on rack, first side to side; then front to back.

If range is not level, pull range forward until rear leveling leg is removed from the anti-tip bracket. Use 3/8" drive ratchet and channel lock pliers to adjust leveling legs up or down until range is level. Push range back into position. Check that rear leveling leg is engaged in anti-tip bracket.

NOTE: Oven must be level for satisfactory baking conditions.

Gas and electrical connection

10.Assemble the flexible connector to the gas supply pipe to the pressure regulator connection fitting, using the adapter fittings provided with the flexible connector. Use pipe-joint compound made for use with L.P. gas to seal all pipe thread connections.

regulator connection fitting

All connections must be wrench-tightened.

 

90˚elbow

 

black iron

pressure regulator

pipe

 

connection fitting

 

union

manual

Typical rigid

gas

pipe connection nipple

shutoff

 

valve

1/2" to 3/4"

 

gas pipe

 

Typical flexible connection

pressure regulator connection fitting

use pipe-joint compound

flexible

adapterconnector

 

use pipe-joint

 

compound

adapter

 

 

manual

 

gas

1/2" to 3/4"

shutoff

valve

gas pipe

 

A 1/2" male pipe thread is needed for connection to pressure regulator female pipe threads.

11.If a flexible appliance connector is used, be certain connector is not kinked.

12.Check that all control knobs are in the “OFF” position.

13.Check that range regulator shutoff valve is in the “on” position. Open the manual shutoff valve in the gas supply line.

viewed from inside broiler compartment

regulator shutoff valve in

“on” position

manual shutoff valve

“open” position

to range

gas supply

14.Test all connections by brushing on an approved non-corrosive leak- detection solution. Bubbles will show a leak. If a leak appears, shut off gas supply valve and tighten connections. Then check connections again. Clean all leak-detection solution from gas connections. Close broiler door.

15.Place burners, burner caps and grates on cooktop.

16.Plug power supply cord into grounded electrical outlet.

Check operation

Electronic ignition system.

Cooktop and oven burners use electronic ignitors in place of standing pilots. When a cooktop control knob is turned to the “LITE” position, the system creates a spark to light the burner. This sparking continues until the control knob is turned to the desired setting.

When the oven control is turned to the desired setting, a hot surface ignitor heats to a bright orange and ignites the gas. No sparking occurs. The glow bar remains on while the burner operates.

6

Page 6
Image 6
Whirlpool 98015195 installation instructions Check operation, Gas and electrical connection

98015195 specifications

The Whirlpool 98015195 is a contemporary appliance designed to enhance the kitchen experience through its innovative features and advanced technologies. This versatile model serves various functions, making it an invaluable addition to any modern household.

One of the standout features of the Whirlpool 98015195 is its spacious design, which allows users to prepare larger meals with ease. The appliance boasts a generous capacity, enabling simultaneous cooking or reheating of multiple dishes. This feature is particularly advantageous for families or those who enjoy entertaining guests, as it reduces cooking time significantly.

In terms of technologies, the Whirlpool 98015195 incorporates advanced cooking modes that ensure precision and consistency. The appliance includes settings for baking, roasting, and broiling, allowing users to achieve optimal results regardless of the cooking task. The built-in sensor cooking technology intelligently adjusts cooking times and power levels based on the food’s moisture content and temperature, ensuring perfectly cooked meals every time.

Another remarkable characteristic of the Whirlpool 98015195 is its user-friendly interface. The appliance is equipped with a digital control panel that offers an intuitive layout, making it easy for users to navigate through various functions and settings. Additionally, the appliance features a bright LED display that provides clear visibility, allowing users to monitor cooking progress at a glance.

The design of the Whirlpool 98015195 also emphasizes energy efficiency. It operates with lower energy consumption compared to traditional cooking methods, promoting environmentally friendly practices while keeping utility costs down. This focus on sustainability aligns with the growing trend of eco-conscious living.

Easy maintenance is another boon of the Whirlpool 98015195. The appliance features a non-stick interior, which simplifies the cleaning process and minimizes the effort required to maintain its pristine condition. The removable components are dishwasher safe, adding to the convenience for busy families or individuals.

In summary, the Whirlpool 98015195 is a state-of-the-art kitchen appliance that combines functionality, efficiency, and user-friendly design. With its spacious capacity, advanced cooking technologies, and commitment to energy efficiency, it is well-suited for a variety of cooking needs in today’s fast-paced lifestyle. Whether you are a culinary enthusiast or simply looking for an efficient way to prepare meals, the Whirlpool 98015195 is a worthy investment for any kitchen.