Do not use rubbing alchol or flammable toxic solvents, such as acetone, gasoline carbon
tetrachloride, etc. These can damage the material. Do not use a sharp instrument or any harsh or abrasive cleaners.
Energy Saving Tips
l Improve home insulation (seal doors, wrndows. and close fireplace flue).
l Close blrnds or drapes on sunny side of house. Add wrndow awnrngs.
Keep air filter clean. Don’t block air flow with drapes or furnrture.
Ventilate attrc (high temperature levels add to normal cooling load).
Try not to use heat producing applrances during the hottest part of the day. Turn lights, radios,
televrsions, and other applrances off when not needed.
Keep heat registers and cool air returns closed or blocked off so cooled air won’t escape.
Use a vent fan in areas In cooking, laundry or bathing areas to pull out extra heat and moisture near its source.
FAN SPEED CONTROL
ENERGYSAVER CONTROL
THERMOSTAT
HOW TO START AND USE
YOUR AIR CONDITIONER
To start Your Air Conditioner
1.Set the FRESH AIR/EXHAUST CONTROL to OFF for maximum cooling.
2.Set the FAN SPEED CONTROL to the desired setting.
QUIET COOL. | for | sleeping | comfort | ||
REGULAR COOL |
| .for | normal | cooling | |
MAX | COOL | .for | maximum | cooling | |
FAN | ONLY | .for | air circulation | only | |
3.Turn THERMOSTAT CONTROL to the mid (Number
6)setting. You can adjust the air conditioner’s
cooling performance by resetting the thermostat control to a higher number for maximum cooling. You will need to experiment to find the setting which suits you best.
When lowenng the thermostat control setting, the
compressor (motor) may shut off. When the
compressor is turned off with either the fan speed control or the thermostat control, wait
before restarting the air conditioner or turning the
compressor back on.
