Whirlpool ACC082XR0 manual Air Conditioner Care, Troubleshooting, Cleaning the Air Filter

Models: ACC082XR0

1 32
Download 32 pages 59.34 Kb
Page 13
Image 13
AIR CONDITIONER CARE

AIR CONDITIONER CARE

Your new air conditioner is designed to give you many years of dependable service. This section tells you how to clean and care for your air conditioner properly. Call your local authorized dealer for an annual checkup. Remember… the cost of this service call is your responsibility.

Cleaning the Air Filter

The air filter is removable for easy cleaning. A clean filter helps remove dust, lint, and other particles from the air and is important for best cooling or heating and operating efficiency. Check the filter every 2 weeks to see whether it needs cleaning.

NOTE: Do not operate the air conditioner without the filter in place.

1.Turn off air conditioner.

2.Using the indents in top of filter door, pull door down. Filter door is not removable.

3.Slide air filter up and out to remove from the filter door.

B

A

A.Indents

B.Air filter

4.Use a vacuum cleaner to clean air filter. If air filter is very dirty, wash it in warm water with a mild detergent. Do not wash air filter in the dishwasher or use any chemical cleaners. Air dry filter completely before replacing to ensure maximum efficiency.

5.Slide air filter down into the filter door. Close filter door.

Cleaning the Front Panel

1.Turn off air conditioner.

2.Remove the air filter and clean it separately. See “Cleaning the Air Filter.”

3.Wipe the front panel with a soft, damp cloth.

4.Air dry front panel completely.

Repairing Paint Damage

Check once or twice a year for paint damage. This is very important, especially in areas near oceans or where rust is a problem. If needed, touch up with a good grade enamel paint.

NOTE: To reduce paint damage during the winter, install a heavy- duty cover over air conditioner cabinet. For information on ordering a heavy-duty cover, see “Accessories.”

Annual Maintenance

Your air conditioner needs annual maintenance to help ensure steady, top performance throughout the year. Call your local authorized dealer to schedule an annual checkup. The expense of an annual inspection is your responsibility.

TROUBLESHOOTING

Before calling for service, try the suggestions below to see whether you can solve your problem without outside help.

Air conditioner will not operate

 

Air conditioner blows fuses or trips circuit breakers

The power supply cord is unplugged. Plug into a grounded 3 prong outlet. See “Electrical Requirements.”

The power supply cord has tripped (Reset button has popped out). Press and release RESET (listen for click; Reset button will latch and remain in) to resume operation.

A household fuse has blown, or a circuit breaker has tripped. Replace the fuse or reset the circuit breaker. If the problem continues, call an electrician. See “Electrical Requirements.”

The Power button has not been pressed. Press POWER.

The local power has failed. Wait for power to be restored.

Too many appliances are being used on the same circuit. Unplug or relocate appliances that share the same circuit.

Time delay fuse or circuit breaker of the wrong capacity is being used. Replace with a time delay fuse or circuit breaker of the correct capacity. See “Electrical Requirements.”

An extension cord is being used. Do not use an extension cord with this or any other appliance.

You are trying to restart the air conditioner too soon after turning it off. Wait at least 3 minutes after turning air conditioner off before trying to restart the air conditioner.

13

Page 13
Image 13
Whirlpool ACC082XR0 manual Air Conditioner Care, Troubleshooting, Cleaning the Air Filter, Cleaning the Front Panel