WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

To test your power supply cord:

1.Plug power supply cord into a grounded 3 prong outlet.

2.Press RESET.

3.Press TEST (listen for click; Reset button will trip and pop out).

4.Press and release RESET (listen for click; Reset button will latch and remain in). The power supply cord is ready for operation.

NOTES:

■The Reset button must be pushed in for proper operation.

■The power supply cord must be replaced if it fails to trip when the test button is pressed or fails to reset.

■Do not use the power supply cord as an off/on switch. The power supply cord is designed as a protective device.

■A damaged power supply cord must be replaced with a new power supply cord obtained from the product manufacturer and must not be repaired.

■The power supply cord contains no user serviceable parts. Opening the tamper-resistant case voids all warranty and performance claims.

INSTALLATION INSTRUCTIONS

Unpacking

WARNING

Excessive Weight Hazard

Use two or more people to move and install air conditioner.

Failure to do so can result in back or other injury.

Remove packaging materials

■Remove and properly dispose of packaging materials. Remove tape and glue residue from surfaces before turning on the air conditioner. Rub a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry.

■Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your air conditioner.

■Handle air conditioner gently.

1.Remove air conditioner from carton and place on cardboard.

2.Remove shipping screw from side wall of cabinet.

A

A. Shipping screw

3.Pull off control knobs (on some models).

4.Remove front panel from air conditioner and set aside.

5.Remove ground screw and ground wire from front of air conditioner base. Save ground screw.

A

+

+ B

A. Green ground wire

B. Ground screw

6.Pull on handle to slide air conditioner out of cabinet. Place air conditioner on cardboard.

A

A. Handle

NOTE: Do not lift, push, pull or remove any expanded polystyrene (foam) from inside the air conditioner. It is not packing material.

5

Page 4 Page 6
Page 5
Image 5
Whirlpool ACC082XR0 manual Installation Instructions, Unpacking, To test your power supply cord, Remove packaging materials
Page 4 Page 6

ACC082XR0 specifications

The Whirlpool ACC082XR0 is a versatile and efficient air conditioner designed to provide comfortable cooling for both residential and commercial spaces. With its sleek design and robust performance, this model stands out as an excellent choice for anyone seeking reliable climate control.

One of the main features of the ACC082XR0 is its cooling capacity. Equipped with a powerful compressor, this air conditioner can cool spaces up to 350 square feet, making it ideal for small to medium-sized rooms. Whether you are looking to beat the summer heat in your living room, bedroom, or office, this unit is designed to deliver refreshing air effectively and efficiently.

The ACC082XR0 also boasts energy-efficient technologies, which help minimize electricity consumption while maximizing cooling performance. It features a programmable timer, allowing users to set specific operating times for their air conditioner, which helps in reducing energy waste when cooling is not needed. Additionally, it comes with an Energy Saver mode that optimizes cooling performance by adjusting fan speed and compressor operation based on the desired temperature, further enhancing energy efficiency.

Moreover, the unit includes a multi-speed fan with adjustable settings that allow you to customize airflow according to your personal preference. This feature provides quiet operation during those hot summer nights, allowing you to sleep comfortably without any disturbances from excessive noise.

Another highlight of the ACC082XR0 is its user-friendly interface. The air conditioner is equipped with a digital display and remote control, enabling easy adjustments from anywhere in the room. The intuitive controls allow you to change temperatures, fan speeds, and modes with ease.

In addition to its cooling capabilities, the ACC082XR0 also features a built-in dehumidification function, which helps remove excess moisture from the air. This is particularly beneficial for humid climates, as it not only enhances comfort but also prevents mold and mildew growth within the living space.

Overall, the Whirlpool ACC082XR0 combines performance, efficiency, and convenience. With its powerful cooling capacity, energy-saving technologies, and user-friendly controls, it provides an excellent solution for anyone looking to maintain a comfortable indoor climate during the warm months. Whether for a home or office, this air conditioner promises a refreshing escape from the heat.
Top Page Image Contents