Whirlpool ACQ294, ACQ214, ACQ142, ACQ154 Startingyour air conditioner, OperatingYourAirConditioner

OperatingYourAirConditioner

Startingyour air conditioner

l

l

l

Electrical Shock Hazard

Plug unit only into grounded electrical outlet

Do not use an extension cord.

Do not operate unit with front removed.

Failure to follow the above precautions could resutt in electrical shock or personal injury

1.Set Exhaust Vent Control to CLOSED for maximum cooling.

2.Set Fan Speed Control to the desired setting.

ENERGY SAVER settings-the fan stops when the compressor stops. This saves energy by not continuously running the fan. There are 3 fan speeds: HI for maximum cooling, MED for normal cooling and LO for sleeping comfort.

NORMAL settings-the fan runs continu- ously. There are 3 fan speeds: HI for maxi- mum cooling, MED for normal cooling and LO for sleeping comfort.

FAN ONLY setting4rculates room air when no cooling is desired.

3.Turn the Thermostat Control to a mid- setting. You can adjust the air conditioner’s cooling performance by turning the Thermo- stat Control clockwise for more cooling. Turn thermostat control counterclockwise for less cooling. You will need to experiment to find the setting which suits you best.

NOTE: If you turn your air conditioner off, wait at least 3 minutes before turning it back on or you may blow a fuse or trip a circuit breaker.

3