Cleaning instructions
Proper use and care of your air conditioner will help ensure longer life of the unit and lower operating costs. Follow these instructions carefully. Call your local servicing dealer for an annual checkup.
Cleaning the front panel
1. Unplug air conditioner or disconnect power.
2. Remove the front panel from unit for cleaning.
3. Place the tip of a thin blade screwdriver against the cabinet behind the plastic projection on the upper right side of the front panel. Gently push with the screwdriver to unlock the plastic projection and pull the front panel forward. Repeat steps for plastic projection on the bottom right side. Watch out for the sharp metal fins on the front and rear condenser coils.
4. Swing the right side of the front panel away from the cabinet and unhook the plastic projection on the left side.
5. Clean the front panel using a soft cloth with
warm water and a mild detergent. Rinse and dry.
6. Replace the front panel. Hook the plastic projections on the left side and swing the right side into position. Gently press the right corners back into position while pushing on the side of the cabinet with the screwdriver.
7. Plug in air conditioner or reconnect power.
Cleaning the slide-out filter
The filter is removable for easy cleaning. A clean filter helps remove dust, lint, and other particles from the air and is important for best cooling or heating and operating efficiency. Check the filter every 2 weeks to see if it needs cleaning. Do not operate the air conditioner without the filter in place.
1. Unplug air conditioner or disconnect power.
2. Grasp air filter at tabs. Slide air filter up and out of filter slot.
3. Use a vacuum cleaner to clean air filter. If air filter is very dirty, wash it in warm water with mild detergent. Do not wash air filter in the dishwasher or use any chemical cleaners. Air dry filter completely before replacing to ensure maximum efficiency.
4. Slide air filter down into filter slot.
6. Plug in air conditioner or reconnect power.
12
