Before using the dishwasher, read the user instructions!
ADG 7952 |
|
|
| Quick Reference Guide | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
On button | Options |
Off button
Programme selection button
Start button
Switches “on” when the dishwasher is operating. Flashes when a fault occurs. Switches off at the end of the programme.
Indicators
Add rinse aid
Add regeneration salt
Only add regeneration salt immediately before starting a wash programme.
GB
Time and failure display 3)
Indicates in hours the time remaining until the start of the wash cycle. Switches off when the programme has started. Toward the end of the programme, during the drying cycle, the display will indicate the time remaining in minutes.
“F...” Identification of faults for service technician
“Delayed start” buttons
The wash cycle can be programmed to start after 1 - 24 hours. With each successive touch of the button, the delayed start indicator increases by 1 hour, and after 24 returns to 00.
Then press the Start button. The dishwasher will start at the set time.
Programme chart | Detergent 2) | Consumption 3) | ||||||
Programmes |
| Loading instructions | A | B | Litres | kWh | Minutes | |
|
|
|
|
|
|
|
| |
Sensor Normal |
| Automatic programme recommended for | X | X | ||||
routine washes, with no | ||||||||
|
| burnt food (not for EN 50242). |
|
|
|
|
| |
|
|
|
|
|
|
|
| |
|
| Automatic programme recommended for |
|
|
|
|
| |
Sensor Intensive |
| heavily soiled crockery with | X | X | ||||
|
| burnt food, for example pans and |
|
|
|
|
| |
|
| saucepans. |
|
|
|
|
| |
|
|
|
|
|
|
|
| |
cold | Crockery to be washed later. | - | - | 5.0 | 0.02 | 10 | ||
|
|
|
|
|
|
|
| |
Glass | 40°C | Light soiling, for example glasses and | X | - | 13.0 | 0.90 | 55 | |
cups. | ||||||||
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| |
Quickwash | 40°C | Lightly soiled crockery, with no | X | - | 13.0 | 0.70 | 30 | |
food. | ||||||||
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| |
| 50°C | Normally soiled crockery. | X | X | 16.0 | 1.24 | 133 | |
|
|
|
|
|
|
|
| |
1)Reference programme for energy label in compliance with EN 50242 regulations;
2)Refer to “User instructions“;
3)Program data obtained in conformity with European standard EN 50242. Values may vary in relation to usage, e.g.: different loads, water temperatures - above or below 15°C - as well as water hardness and power supply voltage, etc.
Important information for Test Laboratories:
For detailed information on the EN/Standard loading comparison test, contact the following address: “nk_customer@email.whirlpool.com”.
Whirlpool is a registered trademark of Whirlpool USA | 5019 396 91257 |
| (We reserve the right to make technical modifications) |
WH/I/FD/GB
