Whirlpool ADO40 Operating models AD025, and ADO%0, AD030, AD040, Control panel, Unit operation

Operating models AD025, and ADO%0

Control panel

These units have a control panel containing two controls-the PAN FULL Light and the Humidistat.

PAN FULL Light-This light glows when the water pan is full and needs to be emptied.

Humidistat-This controls the amount of moisture in the room. When the humidity in the room rises above the setting, the unit automatically starts.

When the humidity drops below the setting, the unit automatically stops. The unit will run constantly when the control is set to DRYEST.

Unit operation:

1.Turn the Humidistat to OFF. Plug the power supply cord into an electrical outlet. Be sure to use the proper grounding method. (See

f-we 6.)

2.Turn the Humidistat toward DRYEST for normal operation.

The Humidistat can be set anywhere between OFF and DRYEST. If you need more dehumidification, turn the Humidistat toward DRYEST. If you need less dehumidification, turn the Humidistat toward OFF.

3.Turn the Humidistat to OFF to stop the unit manually.

AD030, AD040

PAN FULL HUMIDISTAT

0

PAN FULL HUMIDISTAT

PAN FULL

0

9